dangerous during manœuvres or transport.
•
Keep away from electric wires and obstacles. A contact with electric wires cause electrocution
and death.
•
Stop the machine progressively when lifting or lowering the machine.
•
When stopping the work, stop the engine and remove the sparking plug ignition cover before
leaving the mower.
•
Engage all the safety equipments.
•
Move the controls only when correctly sat down in the mower
•
Visually check hydraulic leaks and if some parts are faulty or missing. Repair before use.
•
Never change the adjusment of the regulator, it is set in the factory. Unsetting this valve would
cause failures.
•
Ensure that the user of the machine has already read and understood
this manual and that he is aware of all the safety instructions before
any use.
•
Always use a chuck and bronze hammer when replacing or intervening
on the pins and bolts at the end of rams, rod ... etc in order to avoid the
projection of metal fragments.
•
Clear the mowing path from foreign objects, stones, woods, cans,
bottle, pieces of steel, wich can ne thrown by the mower.
OREC FL500A - © SAT 03/03
5
•