AJAX KeyPad User Manual page 8

Hide thumbs Also See for KeyPad:
Table of Contents

Advertisement

1. Click Devices
Click Service → Sounds and Alerts
2. Enable toggles: If battery of any device is low and If any device is o ine.
3. Click Back to save settings.
Sound notifications of malfunctions settings are available for all hubs (except the Hub
model) with firmware version OS Malevich 2.15 or higher.
Sound notifications of malfunctions are supported by KeyPad with firmware version
5.57.1.1 or higher.
Event
If any device is offline.
If KeyPad is offline.
If battery of any device is low.
Sound notifications of malfunctions appear when the keypad indication is
finished. If several malfunctions occur in the system, the keypad will notify
about the loss of connection between the device and the hub first.
, choose hub and open its settings
Indication
Two short sound signals,
Malfunction indicator
twice.
Beep once per minute until all
devices in the system are
online.
Two short sound signals,
Malfunction indicator
twice.
Beep once per minute until the
keyboard in the system is
online.
Three short sound signals,
Malfunction indicator
three times.
Beep once per minute until the
battery is restored or the
device is removed.
:
Х
blinks
Users can delay sound
indication for 12 hours.
Х
blinks
It's impossible to delay sound
indication.
Х
blinks
Users can delay sound
indication for 4 hours.
Note

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KeyPad and is the answer not in the manual?

Questions and answers

Table of Contents