AJAX KeyPad User Manual page 15

for example, to provide a cleaning company with access to security
management. See how to set up and use each type of code below.
To set keypad code
1. Go to keyboard settings.
2. Select Keypad Code.
3. Set the keypad code you want.
To set the keypad duress code
1. Go to keypad settings.
2. Select Duress Code.
3. Set the keypad duress code you want.
To set a personal code for a registered user:
1. Go to profile settings: Hub → Settings
find the user ID.
2. Click Passcode Settings.
3. Set the User Code and User Duress Code.
Each user sets a personal code individually!
To set an access code for an unregistered person in the system
1. Go to the hub settings (Hub → Settings
2. Select Keypad Access Codes.
3. Set up Name and Access Code.
If you want to set up a duress code, change settings for access to groups, Night
Mode, code ID, temporarily disable or delete this code, select it in the list and
→ Users → User Settings. In this menu you can also
).