Selecting The Location - AJAX KeyPad User Manual

default value is 36 seconds).
There are no pre-set codes for KeyPad. Before using KeyPad, set all necessary codes:
keypad code (general code), personal user codes, and duress codes (general and
personal).

Selecting the Location

The location of the device depends on its remoteness from the hub, and
obstacles hindering the radio signal transmission: walls, floors, large objects
inside the room.
The device developed only for indoor use.
Do not install KeyPad:
1. Near the radio transmission equipment, including that operates in 2G/3G/4G
mobile networks, Wi-Fi routers, transceivers, radio stations, as well as an
Ajax hub (it uses a GSM network).
2. Close to electrical wiring.
3. Close to metal objects and mirrors that can cause radio signal attenuation
or shading.
4. Outside the premises (outdoors).
5. Inside premises with the temperature and humidity beyond the range of
permissible limits.
6. Closer than 1 m to the hub.
Check the Jeweller signal strength at the installation location