AJAX KeyPad User Manual page 14

Brightness
Buttons Volume
Alert with a siren if panic button is pressed
Jeweller Signal Strength Test
Signal Attenuation Test
Permanent Deactivation
User Guide
Unpair Device
Con guring codes
Ajax system allows you to set up a keypad code, as well as personal codes for
users added to the hub.
With the OS Malevich 2.13.1
access codes for people who are not connected to the hub. This is convenient,
Brightness of the keyboard backlight
Volume of the beeper
The setting appears if the Alarm mode is
selected for Function button.
If active, the Function button pressing triggers
the sirens installed at the object
Switches the device to the signal strength test
mode
Switches the KeyPad to the signal fade test
mode (available in devices with rmware
version 3.50 and later)
Allows the user to disconnect the device
without removing it from the system.
Two options are available:
Entirely — the device will not execute
system commands or participate in
automation scenarios, and the system will
ignore device alarms and other notifications
Lid only — the system will ignore only
notifications about the triggering of the
device tamper button
Learn more
Opens the KeyPad User Manual
Disconnects the device from the hub and
deletes its settings
update, we have also added the ability to create