Simple; Monitor Configuration - Datavideo TVS-2000A Instruction Manual

Simple

If the user's selection is "Simple" Mode, a user interface will appear as shown in the diagram
below. On the interface, the user is only given the Graphics Overlay function (Media Stream)
to perform simple customization of the function key. After the function key is customized,
pressing the RMC-280 function key button will play the media stream and again to reverse the
media stream playback.
4.7

Monitor Configuration

The TVS-2000A operates on multiple input and output signals. To ensure better functionality
for the preview of the signals, the user may connect additional monitors to the workstation.
With a separate monitor, the preview can be larger than the one in Production Live.
Another monitor can be used for Multiview, which is a clear interface presenting the previews
available in Production Live.
The following previews are available in Multiview:
• PREVIEW – presentation of the element chosen to be broadcast next;
• PROGRAM – presentation of the current signal (system output);
• Previews of studio scene loaded into memory;
• Preview of all media loaded into virtual players;
• Camera preview (one or two, depending on system configuration).
A third monitor may, with suitable configuration, show a full-screen PREVIEW or PROGRAM
view. The third monitor can also be used for the mirror output of the talent.
41