Table of Contents
Advertisement
Chapter 2
2.1
System Requirement
Monitor x 1 (up to three monitors can be connected to choices of the HDMI x 2, DVI-D x
1, DisplayPort x 2)
Keyboard
2 x SDI cameras for trackless use or Datavideo PTC-150 cameras for tracking use
2.2
Connections
Front Panel
Access to the front panel is protected with a keyed door. This provides protection against the
system being accidentally switched off or reset or the data disk being removed.
It is recommended to position the workstation horizontally so as to ensure air flows reaching
the front and the back panels. Fans providing appropriate system cooling are located behind
the panels. The workstation case is designed to be mounted on a server rack and occupies a
4U space.
Back Panel
Power Supply Socket
Depending on the shipment
destination
location, a power supply cord
with a suitable plug will be
supplied
RS-232 Connection
The rear panel contains the RS-232 connection for operation with an external
Datavideo RMC-280 control panel.
PS/2 Keyboard / Mouse Combo Port
USB 2.0 Ports
Connection of an external standard USB keyboard and mouse
USB 3.0 Ports
Connection of USB Wireless Dongle / Adapter IF ANY
Please note that if you do not find the USB wireless dongle in the box, the
TVS-2000A System Unit that you receive may already have a built-in
wireless network card.
TVS-2000A Tracking Virtual Studio Setup
and
the
8
Power On/Off Switch
Switches power On/Off
user
0 – OFF
1 – ON
Advertisement
Table of Contents
