Close Debug Service; Close Debug Details; Stm32H5 Close Debug Support; Cli Command For Close Debug Command - ST STM32H5 Series Getting Started
Hide thumbs
Also See for STM32H5 Series:
- User manual (44 pages) ,
- Application note (56 pages) ,
- Application note (26 pages)
Table of Contents
Advertisement
In order to reopen debug from HDPL2 nonsecure, use the following command:
.\STM32_Programmer_CLI.exe -c port=SWD speed=fast per=i key=.\key.pem cert=.\certificate_chai
n debugauth=1
In order to reopen debug from HDPL3 nonsecure, use the following command:
.\STM32_Programmer_CLI.exe -c port=SWD speed=fast per=j key=.\key.pem cert=.\certificate_chai
n debugauth=1
3.5
Close debug service
3.5.1
Close debug details
The close debug service enables closing the debug once it has been opened through the debug reopening
service.
3.5.2
STM32H5 close debug support
STM32H573xx
STM32H563xx/STM32H563xx
STM32H503xx
3.5.3
CLI command for close debug command
In order to close the debug, use the following command:
.\STM32_Programmer_CLI.exe -c port=SWD debugauth=3
AN6008 - Rev 1
Table 6.
STM32H5 close debug support
Part number
STM32H5 debug authentication services description
Close debug supported
Yes
Yes
No
AN6008
page 9/25
Advertisement
Table of Contents
Need help?
Do you have a question about the STM32H5 Series and is the answer not in the manual?
Questions and answers