Table of Contents
Advertisement
11
|
Configuration
Installer reference guide
206
5
Additional zone
Space heating/cooling
Tank
User settings
Information
INFORMATION
To make tank defrost possible, we recommend a minimum tank temperature of
35°C.
Tank setpoint screen
You can set the storage tank temperature using the setpoint screen. The resulting
domestic hot water temperature depends on this setpoint as well as the actual
storage tank temperature. For more information about how to do this, see
"11.3.5 Setpoint
screen" [
Powerful operation
You can use powerful operation to immediately start heating up the water to the
preset value (Tank temperature setpoint). However, if no additional bivalent heat
generator except the electrical backup heater is installed, this consumes extra
energy. If powerful operation is active,
To activate powerful operation
Activate or deactivate Powerful operation as follows:
1 Go to [5.1]: Tank > Powerful operation
2 Turn powerful operation Off or On.
Usage example: You immediately need more hot water
If you are in the following situation:
▪
You already consumed most of your hot water.
▪
You cannot wait for the next scheduled action to heat up the storage tank.
Then you can activate DHW powerful operation.
Advantage: The storage tank is immediately heated up to the tank temperature
setpoint.
INFORMATION
When powerful operation is active, the risk of space heating/cooling and capacity
shortage comfort problems is significant. In case of frequent domestic hot water
operation, frequent and long space heating/cooling interruptions will happen.
[5] Tank
Setpoint screen
[5.1] Powerful operation
[5.5] Schedule
[5.6] Heat up mode
[5.7] Disinfection
[5.8] Maximum
[5.9] Hysteresis
[5.B] Setpoint mode
[5.C] WD curve
[5.D] Margin
[5.E] WD curve type
4
166].
will be shown on the home screen.
ERLA11~16D + EBSH/X(B)11+16P30+50D
Daikin Altherma 3 R ECH₂O
4P663482-1C – 2023.05
Advertisement
Table of Contents
