Table of Contents
Advertisement
7.14.1
Sending a Quick Text Message
When and where to use:
Quick Text messages are messages that are predefined and usually consist of messages that are used most
frequently.
Each Quick Text message has a maximum length of 50 characters. You can select the required text from the
Quick Text.
Procedure:
1. Perform one of the following actions:
●
To access this feature using the preprogrammed button, press the preprogrammed Quick Text
button and proceed to
●
To access this feature using the menu, proceed to the next step.
2.
or
to TMS and press the Menu Select button directly below TMS to access the TMS feature
screen.
3. Perform one of the following actions:
●
or
to Compose and press the Menu Select button directly below Sel .
●
Press the Menu Select button directly below Exit to return to the Home screen.
4.
or
to Quick Text and press the Menu Select button directly below Sel for a predefined
message.
5.
or
to scroll through the list of messages and press the Menu Select button directly below Sel
to select the required message.
The message appears on the Compose screen, with a blinking cursor at the end of it.
6. Press the Menu Select button directly below Optn .
7.
or
to Send Message and press the Menu Select button directly below Sel .
8.
or
to scroll through the address list and select the required address.
The message is sent after the address is selected.
step
4.
MN004863A01-AN
Chapter 7: Advanced Features
71
Advertisement
Table of Contents
