Table of Contents
Advertisement
If no acknowledgment is received, the display shows No acknowledge.
If the target radio does not respond before the time out, the display shows No answer.
5. Press and hold the PTT button to talk. Release the PTT button to listen.
6. Press
to return to the Home screen.
5.5.4
Making a Telephone Call (Trunking Only)
This feature allows you to make calls similar to standard phone calls to a mobile or landline phone.
Procedure:
1.
or
to Phon, and press the Menu Select button directly below Phon.
The display shows the last transmitted or received ID.
2. To select the required ID, perform one of the following actions:
●
Press the Menu Select button directly below Cnts to scroll through and select the required ID.
●
Press the Menu Select button directly below LNum to go to the last number dialed.
●
or
to the required phone number.
3. Press the PTT button to dial the phone number.
4. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
5. When your call is answered, press and hold the PTT button to talk. Release the PTT button to listen.
6. Press
to return to the Home screen.
Result: See
Phone Call Displays and Alerts on page 33
5.6
Switching Between Repeater or Direct Operation
Button
The Repeater Operation increases the radio coverage area by connecting with other radios through a
repeater. The transmit and receive frequencies are different. The Direct or "talkaround operation" allows you
to bypass the repeater and connect directly to another radio. The transmit and receive frequencies are the
same.
Procedure:
Perform one of the following actions:
●
Press the preprogrammed Repeater/Direct switch to toggle between talkaround and repeater mode.
●
or
to Dir and press the Menu Select button directly below Dir.
5.7
Monitor Feature
The monitor feature ensures that a channel is clear before transmitting.
Chapter 5: General Radio Operation
for more information if your call is not answered.
MN004863A01-AN
39
Advertisement
Table of Contents
