Table of Contents
Advertisement
Chapter 7
Advanced Features
This chapter explains the operations of the features available in your radio.
7.1
Advanced Call Features
This chapter explains the operations of the call features available in your radio.
7.1.1
Selective Call (ASTRO Conventional Only)
A Selective Call is a call from an individual radio to another individual radio with privacy.
7.1.1.1
Receiving a Selective Call
When and where to use: When you receive a Selective Call, the radio indicates one of the followings:
●
You hear two alert tones and the LED lights up solid yellow to indicate the transmitting radio is still
sending signal. The call received icons blinks and the display shows Call received.
●
The LED blinks solid green once to indicate the transmitting radio is pending to receive signal.
The speaker unmutes.
Procedure:
1. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
2. Press and hold the PTT button to talk. Release the PTT button to listen.
7.1.1.2
Making a Selective Call
Prerequisites: Your radio must be preprogrammed for you to use this feature.
Procedure:
1.
or
to Call, and press the Menu Select button directly below Call.
The display shows the last transmitted or received ID.
2. To select the required ID, perform one of the following actions:
●
Press the Menu Select button directly below Cnts to scroll through and select the required ID.
●
Press the Menu Select button directly below LNum to go to the last number dialed.
●
or
to the required ID.
3. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
4. Press and hold the PTT button to start the Selective Call.
MN004863A01-AN
Chapter 7: Advanced Features
43
Advertisement
Table of Contents
