Table of Contents
Advertisement
If the message is not sent, you hear a low tone, the display shows Send failed and returns to the
main TMS screen.
NOTE: You can append a priority status and/or a request reply to your message. See
Status and Request Reply for New Text Messages on page 88
You can also select the Save to Drafts option to save your message in the Drafts folder to
send it at a later time. See
7.16.3
Sending a Quick Text Message
When and where to use:
Quick Text messages are messages that are predefined and usually consist of messages that are used most
frequently.
Each Quick Text message or Query has a maximum length of 50 characters. You can select the required text
from the Quick Text or Query.
Procedure:
1. Perform one of the following actions:
●
To access this feature using the preprogrammed button, press the preprogrammed Quick Text
button and proceed to
●
To access this feature using the menu, proceed to the next step.
2.
or to TMS and press the Menu Select button directly below TMS to access the TMS feature screen.
3. Perform one of the following actions:
●
or
to Compose and press the Menu Select button directly below Sel .
●
Press the Menu Select button directly below Exit to return to the Home screen.
4.
or
to Quick Text and press the Menu Select button directly below Sel for a predefined
message.
5.
or
to scroll through the list of messages and press the Menu Select button directly below Sel to
select the required message.
The message appears on the Compose screen, with a blinking cursor at the end of it. Use the keypad
to edit the message, if required.
6. Press the Menu Select button directly below Optn .
7.
or
to Send Message and press the Menu Select button directly below Sel .
8. Perform one of the following actions to send the message:
●
or
to scroll through the address list and select the required address. The message is sent
after the address is selected.
●
or
to [Other Recpnt] and press the Menu Select button below Edit. When a blinking
cursor appears on the Enter Address screen. Use the keypad to type the address entry.
Proceed to
step 9
9. Press the Menu Select button directly below Send or press the PTT button to send the message.
The display shows the Send Message screen and Sending msg.
If the message is sent, you hear a tone and the display shows Msg sent.
Accessing the Drafts Folder on page 91
step
4.
to send the message.
MN004478A01-AN
Chapter 7: Advanced Features
Priority
for more information.
for more information.
87
Advertisement
Table of Contents
