Table of Contents
Advertisement
MN004863A01-AN
Chapter 7: Advanced Features
c. Press the Menu Select button directly below Sel to select the radio profile with the required
speaker routing or press the Menu Select button directly below Exit to exit the screen without
making any changes.
The radio returns to the Home screen. The profile name on the Home screen indicates the current
selected radio profile.
●
Select the audio speaker using the radio menu Prfl:
a.
or
to Prfl.
b. To access the Profiles feature screen, press the Menu Select button directly below Prfl.
c.
or
to scroll through the menu selections.
d. Press the Menu Select button directly below Sel to select the radio profile with the required
speaker routing or press the Menu Select button directly below Exit to exit the screen without
making any changes.
The radio returns to the Home screen. The profile name on the Home screen indicates the current
selected radio profile.
7.25.5
Controlling the Display Backlight
You can enable or disable the radio display backlight as needed, if poor light conditions make the display or
keypad difficult to read.
You can also maintain a minimum backlight level on the radio front display, depending on how your radio is
programmed.
NOTE: The backlight setting also affects the Menu Select buttons and Navigation button backlighting
accordingly.The backlight setting also affects the Menu Select buttons, the Navigation button, and the
keypad backlighting accordingly.
The backlight remains on for a programmed time before it automatically turns off completely or returns
to the minimum backlight level.
Procedure:
Perform one of the following actions:
●
To turn the backlight on, press any key of the keypad, the Menu Select or Navigation button, or any
programmable radio controls or buttons.
7.25.6
Locking and Unlocking the Keypad and Controls
You can lock your radio keypad, programmable buttons, and knob or knobs to avoid inadvertent entry.
Check with your dealer or qualified technician for best selection to suit your usage.
Procedure:
1. Toggle the preprogrammed Keypad/Control Lock button to on.
The display shows Kypd/Ctrl Lock.
2. Toggle again to unlock the controls.
102
Advertisement
Table of Contents
