Download Print this page

Extron electronics NAV E 121 Setup Manual page 3

Streaming encoder
Hide thumbs Also See for NAV E 121:

Advertisement

Connection via web pages
Connection to the encoder and its embedded web pages can be made via either the front panel Configuration (USB) port (using IP
over USB technology) (see figure 2,
Access the encoder using HTML pages as follows:
1.
Open a web browser.
NOTES:
• Suggested browsers to fully support the NAV system are: Google Chrome™, Mozilla™ Firefox™, and Microsoft
Edge™.
• The network must be properly configured for multicasting (IGMP). Failure to do so may result in degraded performance.
2.
Enter the IP address of the encoder in the browser Address field.
NOTES:
Default settings:
Port
Config (USB)*
NAV/PoE+ (RJ-45)
If you use IP over USB, Extron recommends waiting a minute after plugging in the cable for your PC to identify the
USB connection as a valid Ethernet port.
3.
Press the keyboard <Enter> key. The browser
displays a privacy error message (see
figure 3 at right for an example in the Chrome
browser).
4.
Click Advanced (see figure 3,
button changes to Hide Advanced and
explanatory text and a link appear below the
button.
5.
Click Proceed to <IP address> (unsafe) (
(or the equivalent message from your
browser). The browser opens to the Login
dialog box (see figure 4).
1 1 1 1 1 1
1 1 1 1
1 1 1 1
2 2 2 2
2 2 2 2 2 2
2 2 2 2
3 3 3 3
3 3 3 3 3 3
3 3 3 3
Figure 4.
Login Dialog Box
6.
Enter the Username (see figure 4,
web pages (see
figure 5
:
NOTES
• The default Username is admin.
• The factory configured passwords for all accounts on this device have been set to the device serial number. If the
password is reset, the encoder reverts to the default password, which is extron.
• Usernames and passwords are case sensitive.
A
on page 2) or the rear panel NAV 1G/PoE+ port (see figure 1,
DHCP
IP address
203.0.113.22
On
1
). The
)
2
1 1 1 1 1 1 1 1
1 1 1 1
1 1 1 1 1 1
2 2 2 2
2 2 2 2 2 2 2 2
2 2 2 2 2 2
) and Password (
1
on page 4).
* For the CONFIG port, the address for IP over
Subnet mask
USB CANNOT be changed.
If the unit does not receive a DHCP address, a
self-assigned Link Local Address, is assigned
in the range 169.254.X.X.
Figure 3.
Privacy Error Message (in Chrome Browser)
) and click SIGN IN (
2
on page 1).
D
). The browser opens to the embedded
3
®
3

Advertisement

loading
Need help?

Need help?

Do you have a question about the NAV E 121 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel