Mitsubishi XPANDER HEV 2023 Manual page 167

Table of Contents

Advertisement

Brake auto hold
NOTE
• When the vehicle is stopped on a steep
slope. (The Electric parking brake will be
automatically applied.)
6
To activate brake auto hold
When the vehicle is stopped by depressing
the brake pedal with the select position in any
position other than the "P" (PARK) or "R"
(REVERSE) position, the brake auto hold
activates and the vehicle will be held station-
ary.
The brake auto hold indicator display (green)
in the instrument cluster will appear while the
system activates.
Indicator display (green)
CAUTION
 Release the brake pedal after the brake auto
hold indicator display (green) appears.
6-30
Starting and driving
NOTE
 In the following situations, the brake auto
hold system may not operate temporarily.
• The vehicle is stopped on a slippery road.
• The vehicle was stopped while the steering
wheel was turned all the way to the left or
right.
• The vehicle is being turned on a parking lot
turntable.
If this occurs, the brake auto hold system
will return to the normal operation if you
depress the accelerator pedal and the vehi-
cle starts moving again.
 If the following operation is performed, the
brake auto hold will be deactivated, and the
brake auto hold indicator display (green) in
the instrument cluster will go off.
• When putting the select position to the "P"
(PARK) or "R" (REVERSE) position with
depressing the brake pedal.
• When the Electric parking brake is applied
by using the Electric parking brake switch.
 While the vehicle is held stationary with the
brake auto hold system, the Electric parking
brake will be automatically applied under the
following conditions, and a buzzer will
sound and the message will appear on the
information screen in the instrument cluster.
• After a period of time has elapsed with the
brake auto hold system applied.
• When the driver's seat belt is unfastened.
• When the driver's door is opened.
• When the operation mode of the power
switch is put in OFF.
NOTE
• When the system detects the vehicle sliding
down a slope.
• When the vehicle is stopped on a steep
slope.

Advertisement

Table of Contents
loading

Table of Contents