Mitsubishi XPANDER HEV 2023 Manual page 192

13- Air conditioning indicator  P.7-8
14- Temperature display  P.7-8
 Usage
• Changing the position of air flowing
from the ventilators  P.7-3
• Demisting of the windscreen and door
windows → P.7-7
• Adjusting the blower speed  P.7-7
• To stop the fan  P.7-8
• Adjusting the temperature control
 P.7-8
• Cooling  P.7-9
• Heating  P.7-10
• Switching the air conditioning system
ON/OFF  P.7-8
• Switching outside air and recirculated air
 P.7-8
• Driving in polluted outside air condi-
tions  P.7-10
Demisting of the windscreen
and door windows
E00776400122
1. Press the demister switch to change to the
" " position. When the demister switch
is pressed, the indicator lamp (A) comes
on.
2. Select your desired blower speed by using
the blower speed selection switch.
3. Set the temperature rather high by using
the temperature control switch.
CAUTION
 For safety, make sure you have a clear view
through all the windows.
 Do not set the temperature to the max. cool
position. Cool air will blow against the win-
dow glasses and prevent demisting.
Manual air conditioning
NOTE
 When demisting quick, set the blower to the
maximum speed and the temperature to the
highest position.
 To demist the door windows effectively,
direct the air flowing of the side ventilators
towards the door windows.
 When the demister switch is pressed, the air
conditioning system operates and outside air
(as opposed to recirculated air) is selected.
 To ensure a clear view, the engine may start
when the demister switch is pressed even
while the EV priority mode is activated.
Refer to "Drive mode" on page 6-23.
Adjusting the blower speed
Push up the blower speed selection switch to
increase the blower speed.
Push down the blower speed selection switch
to decrease the blower speed.
The selected blower speed will be shown in
the display (A).
For pleasant driving
7
E00771500115
7-7