Starting And Stopping The Hybrid Ev System - Mitsubishi XPANDER HEV 2023 Manual

Starting and stopping the Hybrid EV System

NOTE
 If there is a fault in the steering wheel lock
and the steering wheel cannot be locked, the
warning display will appear and the inner
buzzer will sound. Change the operation
mode of the power switch from ON to OFF
and trying to lock the steering wheel again. If
the warning display appears again, have your
vehicle checked at an
6
MITSUBISHI MOTORS dealer.
 If there is a fault in the steering wheel lock,
the warning display will appear and the inner
buzzer will sound. Immediately stop the
vehicle in a safe place and contact the near-
est authorised MITSUBISHI MOTORS
dealer.
6-16 Starting and driving
Starting and stopping the
Hybrid EV System
Starting the Hybrid EV System
CAUTION
authorised
 When the Hybrid EV System warning lamp
comes on while the READY indicator is on,
avoid high-speed driving and have your
vehicle inspected
MITSUBISHI MOTORS dealer as soon as
possible.
Refer to "Hybrid EV System warning lamp"
on page 5-41.
 Never attempt to start the engine by pushing
or pulling the vehicle.
1. Fasten the seat belt.
2. Make sure the Electric parking brake is
applied.
3. Press and hold the brake pedal down
firmly with your right foot.
NOTE
 It may become difficult to press down on the
brake pedal when the Hybrid EV System is
E00620601758
not started, and it may not be possible to
detect operation of the pedal. The Hybrid EV
System may not start for this reason. If this
happens, press down on the brake pedal more
E00620702310
firmly than usual.
4. When you press the power switch while
depressing the brake pedal, the READY
indicator in the instrument cluster blinks
by an authorised
and the activation of the Hybrid EV Sys-
tem starts.
5. When the READY indicator changes
from blinking to staying on, the startup of
the Hybrid EV System is activated and the
vehicle is now ready to drive.
CAUTION
 Do not press the power switch while holding
the selector lever at the operated position.
NOTE
 Continue to depress the brake pedal until the
READY indicator in the instrument cluster
stays on.