Maintenance - Panasonic DH-3VL1 Operating And Installation Instructions

MAINTENANCE

WARNING
1. Main Body cleaning.
Be sure to switch OFF the Miniature Circuit Breaker beforehand.
1) Clean it with moist cloth.
2) Never use benzene, thinner, detergent, bleach, etc.
3) Do not spray water to the Unit, nor put wet towels on it.
4) Make sure to use suitable cloth to clean the Front Plate surface to avoid scratch.
2. Shower Head cleaning.
1) Clean the Shower Head's holes by using a soft brush from time to time. (Recommended once a week).
3. Filter Unit Cleaning (Filter Unit is fi xed to Filter Knob).
Clean the Filter of the Filter Unit with water once a week.
Clean the Filter Unit when hot water is not drawn normally.
Dismantle, cleaning and assemble of Filter Unit.
Close the Main Water Valve.
Water Volume Knob
Main Water Valve
Clean the Filter Unit.
O Ring
Filter Unit
Insert the Filter Unit and tighten it properly (clockwise).
Turn the Water Volume Knob to its original position base on Water
Flow Rate Adjustment at page EN8.
Switch Off the Miniature Circuit Breaker (MCB) before any service to
avoid electric shock hazards.
OFF OFF OFF OFF
MA MA MA MA
Filter Knob
CAUTION
EN9
Shower Head
Turn the Filter Knob anticlockwise and pull it out.
MAX
Please make sure the O Ring is not
removed and shall be free from foreign
particle to avoid water leaking.
MAX
MAX