Table of Contents
Advertisement
Maintenance
WARNING
Do not spray any water or cleaning agent on
the electric bidet seat or power plug.
(Otherwise, electric shock or fire can result from
short circuit may be incurred.)
1
Use a piece of soft cloth soaked in water and
wrung out thoroughly.
Do not rinse with water. (Risk of failure)
Do not use any dry cloth or paper towel. (Risk of scratch)
2
Dirt difficult to remove
You may wipe it off with diluted mild detergent.
Do not use the following cleaning agents as they are
corrosive to the metal parts of the product, leading to
malfunctions.
Acidic and alkaline
detergents
Note
Do not let any detergent to contact the body when
cleaning the toilet. In addition, finish cleaning the
toilet as soon as possible as the volatile gas is
harmful to the electric bidet seat.
When the product is used in a wet environment,
remove moisture with a ventilator or similar devices.
Otherwise, malfunctions may occur.
14
Body Surface / Lid / Base
Easy and Convenient
Daily Maintenance
Detergents
Gasoline
Industrial
containing
thinners
detergents
abrasives
Body Surface (Daily)
Use a piece of soft cloth soaked in water
and wrung out thoroughly.
1
Unplug the power plug.
2
Wipe off the dirt on the body surface.
3
Plug the power plug.
Tips
If urine is found on the body or seat, wipe it off
immediately. Otherwise, pink or brown dirt
will be created.
Lid (1 Time per Week)
The lid can be removed for cleaning.
1
Unplug the power plug.
2
Remove the lid.
With the lid opened,
Open the lid and pull the right side of the Lid.
Lift up.
Remove the lid from the left hole of the body.
(Pay attention not to pinch your fingers.)
3
Wipe off any dirt on the lid.
4
Re-install the lid.
Insert the lid into the right axle of the body.
Insert the lid into the left hole of the body.
Once the lid is installed, hold the lid with your
hands to check if it can be opened and closed
properly.
(If the lid is not installed correctly, it may not be
opened and closed properly.)
5
Plug the power plug.
Advertisement
Table of Contents
