Front Panel Facilities - Pioneer VSX-D2S Operating Instructions Manual

FRONT PANEL FACILITIES
ven. ven @ woro Twear 10 Yara. yaen 2 emOnwo Tune cl
00000 00000
@ POWER STANDBY/ON switch/indicator
This is the switch for electric power.
ON. ....... 2000s When setto the ON position, power is supplied and the
unit becomes operational.
STANDBY .. When set to STANDBY position, the main power flow
is cut and the unit is no longer fully operational. A
minute flow of power feeds the unit to maintain
operation readiness.
The STANDBY indicator lights when the power is STANDBY, and
goes out during ON.
@ MULTI ROOM indicator
This lights when the Multi Room & Source function is switched ON
with the MULTI ROOM & SOURCE button (@).
® Input selector buttons
¢ Video input selector
VCR i : Press when performing playback on a first VCR unit.
VCR2 : Press when performing playback on a second VCR
unit.
VIEBEO : Press when performing playback on a TV camera or
VCR connected to VIDEO INPUT jack on the front
panel.
TV /SAT : Press to watch TV broadcasts from the TV tuner
connected to the rear panel TV/SAT IN jacks.
LD : Press when performing playback on an LD player.
¢ Audio input selector
TAPE 1 : Press when performing playback on a cassette
deck.
TAPE 2 MONITOR
: Press when performing playback on a second
cassette deck and when monitoring recording. On/
off switching is independent of other input selector
buttons.
PHONO : Press when playing records on a turntable.
TU NER : Press when listening to radio broadcasts.
cD : Press when playing compact discs on a CD player.
22
<A\RB1455>
NOTE:
High level input may result in distortion because of the digital
processing performed by this unit's Digital Signal Processor. This is
Particularly true when using a turntable with a high output cartridge.
If there is distortion due to an excessively high input level from the
cartridge or another component, use the INPUT ATT butor7 (@)} to
adjust input level.
@ DIRECT button/indicator
Press this to listen to source sound without passing the audio signal
through sound quality and balance adjusting circuitry.
The SFC mode, and rear and center speakers are autprnatically
switched off.
@® MASTER VOLUME control
Use to adjust the sound voiume from the front, cente, aand rear
speakers. When you adjust volume by remote control, the indicator
on the knob flashes.
© SELECTION button
This recalls in sequence the four factory preset system
configurations for first-time users.
[- STEREO —» MOVIE —» CONCERT —» SPORTS a
STEREO : AMPLIFIER + GRAPHIC EQUALIZER + EXYPAANDER/
COMPRESSOR
MOVIE : AMPLIFIER + PRO LOGIC PROCESSOR +- BASIC
SFC (MOVIE) + TONE CONTROLLER + BASS
ENHANCER