Pioneer VSX-D2S Operating Instructions Manual page 48

OPERATING TUNER
8. Move the cursor to "«— " (RETURN), and press the ENTER
button.
© This returns you to the MEMORY SELECT menu. If you move
the cursor to "CLOSE!" on the MEMORY SELECT menu, and
press the ENTER button once more, you return to the original
menu display.
To program Custom Memory into which stations have already
been memorized, or to change memorized data, perform
procedures 6 to 8.
Listening To Broadcasts Using Preset Tuning
[When recalling with the channel number]
1. Select the channel number of the station you want to receive
from the numbers (1 to 9, 0) in the tuner image (Move the
cursor to the desired number with the A, V, <, and >
buttons, and press the ENTER button).
oJ
© Press the ENTER button once to specify channels 1 to 10, press
it twice to specify channels 11 to 20, and press it three times to
specify channel numbers 21 to 30.
{Example] If you select "3":
Press the ENTER button once — channel 3
Press the ENTER button twice — channel 13
Press the ENTER button three times — channel 23
The channel can also be specified with the remote control's
number buttons. Press the number button once to recall preset
channels 1 to 10, press it twice to recall preset channels 11 to 20,
and press it three times to recall preset channels 21 to 30.
[When selecting from the Station List display]
1. Move the cursor to "ST.LIST" in the tuner image, and press
the ENTER button.
A list of the preset stations is displayed.
V-6DIT SYSTEM SELECTOR DESIGN
MENU
RECEIVER CONTROL
@) PIONEER
AUDIO VIDEO PROGRAMMABLE cp
REMOTE CONTROL UNIT
2. Move the cursor to the channel number (ST.No.) ofthe station
you want to receive, and press the ENTER button.
¢ The specified station is received.
3. Move the cursor to "CLOSE!" above the list on the right, and
press the ENTER button to return to the original menu
display.
Last Station Memory
When the POWER switch is pressed to turn the poweron, the last
station received before the power was turned off willbe tuned in
again.
When the power is ON, if the BAND FM/AM button is pressed, the
last station received on that band will be tuned in again.
Reception of consecutive broadcast stations memoized (each
Station is received for about five seconds).
[Scanning all the Stations Memorized]
1. Move the cursor to "SCAN" in the tuner image, ani pwess the
ENTER button.
® Preset stations are received in order for fives secodss each.
© If you leave the cursor on "SCAN" and press the ENEFR button
once more, scan operation ends, and reception ofthee station
being received at that time continues.
48
<ARB1455>