Table of Contents
Advertisement
FRONT PANEL FACILITIES
© The illustration shows multi-voltage model.
@ POWER (STANDBY/ON) switch
This is the switch for electric power.
ON:
When set to the ON position, power is supplied and
the unit becomes operational.
When set to the STANDBY position, the main pow-
er flow is cut and the unit is no longer fully opera-
tional. A minute flow of power feeds the unit to
maintain opetation readiness.
* The accessory remote control unit can also be used to operate
STANDBY/ON.
STANDBY:
NOTE:
When the power is initiaHy turned ON, muting will be applied to
prevent sound from being output for approx. 5 seconds.
@ PHONES jack
Connect the plug on your headphones to this jack. To listen to a
program through the headphones, set both SPEAKERS A and B
switches to the OFF position.
@ SPEAKERS A, B ( 3 OFF, == ON) buttons
These are used to select the speaker through which you wish to
listen.
A: When the speakers connected to A terminals are in use.
B: When the speakers connected to B terminals are in use.
*® Turn both A and B speakers to OFF position when only the
headphones are in use.
NOTE:
No sound will be heard through the speakers when both A and B
buttons are depressed if only one set speakers has been connect-
ed to either A or B SPEAKERS terminals.
@ STATION CALL buttons
These buttons are used to preset and recall desired broadcasting
stations.
© TAPE 2 MONITOR button
Press when listening to tape playback with the cassette deck 2.
6
©) Function buttons
Use to select playback source.
[TAPE 1/DAT]
— Press when listening to tape playback
with the cassette deck 1 or digital audio tape deck.
{VCR/LD] — Press when listening to programs from a com-
ponent connected to the VCR/LD terminals.
[CDi -— Press when listening to compact disc playback
with a CD player.
@ MEMORY
bution
When the unit is in the frequency display mode, pressing this but-
ton will result in the memorization of the current broadcast band,
reception frequency, and FM AUTO/MONO
mode.
This button is also used to input custom
memory
names
(see
page 12).
® SCAN button
This button is used for both station mernory scan and custom me-
mory scan.
@© BAND Selector buttons
These buttons are used to select either AM or FM reception.
4d CUSTOM
MEMORY
buttons
Stations can be assigned to STATION CALL buttons according to
the genre of material broadcast (POP, ROCK, OTHER). You can
recall a particular genre, and scan all the stations of that genre
with Memory Scan until you reach the desired one. (Refer to page
12 for details concerning memory operation)
<ARB1439 >
Advertisement
Table of Contents
