Front Panel Facilities .0 - Pioneer VSX-604S Operating Instructions Manual

FRONT PANEL FACILITIES
Illustration shows multi-voltage model.
O® @O©
@) Remote sensor
@ POWER STANDBY/ON switch
STANDBY indicator (Mutti-voltage model only)
This is the switch for electric power.
ON : When set to the ON position, power is supplied
and the unit becomes operational.
STANDBY: When set to the STANDBY position, the main
power flow is cut and the unit is no longer fully
operational. A minute flow of power feeds the
unit to maintain operation readiness.
(Multi-voltage model only)
The STANDBY indicator lights when the power is set to
STANDBY, and goes out when set to ON.
(Timer ON/OFF possible)
When the unit is switched ON, ON/OFF control can be
performed by means of the optional timer.
NOTE:
When the power is initially turned ON, muting will be applied to
prevent sound from being output for about 5 seconds.
@ SPEAKERS buttons (A,B)
ON/OFF switches for the A and B speaker systems.
14
<ARB7022>
Cy
MBS @D DAWN] BD @
@ RETURN button
Press this button to return the receiver to its initial state.
TUNER is selected at this initial state. Adjust the sound 'evel
by using the MASTER VOLUME control.
TAPE 2 MONITOR....OFF = MUTE... eeereees OFF
SFC MODE ............. OFF FUNCTION.......... TUNER
SUPER BASS ............ OFF
And SPEAKERS buttons switch as follows.
Before pressing the
RETURN button
Both A and B are off Only A is on
Only A is on ———» No change
Only B is on ——» Both AandB areon
Both A and B are on No change
NOTE:
Press the RETURN button, and the frequency last selected is
received. If reception of the frequency last selected is not possible,
the mode automatically switches to AUTO TUNING.
After pressing
©) Input selector buttons
TAPE 1/VCR
: Press when performing playback on a VCR unit
or cassette deck.
TAPE 2 MONITOR
: Press when performing playback on a second
cassette deck and when monitoring recor ding.
PHONO : Press when playing records on a turntable.
TUNER _ : Press when listening to radio broadcasts.
LD : Press when performing playback on an LDplayer.
CD : Press when playing compact discs on a CD player.
© DOLBY 3CH LOGIC button *
Select this setting when stereo-source regeneration and rear
speakers are not connected and you wish to use thefront L,
front R, and center speakers to enjoy audio/visual material
bearing the O10 cots surnounp mark,