Pioneer VSX-D2S Operating Instructions Manual page 24

FRONT PANEL FACILITIES
DISPLAY SECTION
® ® ®
mM OVER LOAD | INPUT ATT
mdb mix 4v¥ 'ep fA] &
@ (FADE PW 1 ampLiFiER
fatale Latte
———
SELECTION
ISEUIDAR
fpocerry rors} |
fo)
@® VIDEO NR indicator
Lights when the video noise reduction circuitry is switched ON.
@ INPUT ATT indicator
Lights when the input attenuator circuitry is switched ON.
@® sp > [Aj [(B] indicators
[Al : Lights when FRONT SPEAKERS A are ON.
: Lights when FRONT SPEAKERS B are ON.
® OVERLOAD indicator
Lights when the input signal level is excessive.
® VIDEO EDIT indicators
When the VIDEO EDIT mode is selected, the bottom line lights.
When <J is indicated on the left side of the "FADE" display, images
fade in from black and fade out to black. When & is indicated on the
right side of the display, images fade in from white and fade out to
white. When fading in or out, "VIDEO EDIT" and the bottom line, and
<1 or > flash, indicating that video editing is in progress. During
mixing level setting, > and <J by the sides of "MIX" flash, indicating
that mixing is in progress.
© SELECTION indicators
Displays preset system names recalled with the SELECTION button.
Each time the SELECTION button is pressed, the display changes as
follows.
x STEREO —» MOVIE -—> CONCERT ~—» SPORTS |
© Level indicators
Inclicate input signal levels.
24
<ARBI455>
vvvvvvw
|
ee ae == Ee aitca
©
7
AM
FM MONO
KHz TUNED
Miz STEREO
AOCK JAZZ NEWS PARTY SFC PROCEBIOR
EXPANOER coLey AQVANCED
OMPRESSOR PRO-LoaIC mone ve. 4
=- 7 | ADLC | o move O , 4
Hininvcacatetll © GELay o pLIGTENING
= Wx
®
AMPLIFIER indicator
When AMPLIFIER is selected with PARAMETER CONTROL, this
flashes to indicate that balance adjustment and TEST TONE
operation are possible.
@ TONE CONTROLLER indicators
If TONE CONTROLLER is included in the selected system, the bottom
line lights. At this time, the channels that can be controlled (FRONT,
CENTER, REAR) light in the top display.
When you select TONE CONTROLLER with PARAMETERCONTROL,
the bottom line flashes, indicating that tone control operation is
possible.
Pertinent indications during operation flash (e.g. FRONT BASS +
operation, "FRONT", "TONE CONTROLLER', and > flash).
@ PARAMETRIC EQUALIZER indicators
If the selected system includes PARAMETRIC EQUALIZER, the
bottom line lights. At this time, the channels that can bi equalized
(FRONT, CENTER) light in the top display.
When you select PARAMETRIC EQUALIZER with PARAAMETER
CONTROL, the bottom line flashes, indicating that parametric
equalizer operation is possible. Pertinent indications Ight during
operation.
@ GRAPHIC EQUALIZER indicators
If the selected system includes GRAPHIC EQUALIZER, the bottom
line lights. At this time, the channels that can be equalizid (FRONT,
CENTER) light in the top display.
When you select GRAPHIC EQUALIZER with PARZAMETER
CONTROL, the bottom line flashes, indicating that graphic e qualizer
operation is possible. Pertinent indications light duringop eration.
@ CUSTOM indicators
Indicate the selection made from tuner section custon rnemory
(POP, ROCK, JAZZ, NEWS, PARTY).
@ BASS ENHANCER indicators
If the selected system includes BASS ENHANCER, the ioptfom line
lights.
When you select BASS ENHANCER with PARAMETER tc#NTROL,
the bottom line flashes, indicating that bass enhancer me sation is
possible. "BASS ENHANCER" and "V" flash during ope¢azcion.