Specifications And Wiring Of Ac Power Module - FATEK M Series User Manual

Chapter 4 Power Wiring, Power Consumption Calculation, and Power Sequence Requirements
There are two kinds of power for M-series PLC power module. The 1st one is CPU dedicated power
supply. The 2nd one is external Sensor power supply. The CPU module and the extension module are also
divided in 2 parts of circuits. The 1st one is 24VDC (Output Circuit), the 2nd one is 24VDC (Input Circuit).
The 24VDC (Output Circuit) is supplied by the CPU dedicated power supply of the M series PLC power
module. The 24VDC (Output Circuit) can be supplied by an external power supply or by the external Sensor
power supply of the M series PLC power module. Neither the CPU module nor the extension module has a
power supply, and both must consume the power of the power module to supply power.
In industrial environments, main power may irregularly experience a surge current or high voltage pulse
caused by the start or shut down of hig- power equipment. Users are advised to take necessary measures
(for example, the use of isolation transformer or other MOV suppression devices) for the protection of
PLC and its peripherals.
4-1 Specifications and Wiring of Power Module
Power Module Specification Table
Specification Model
Input Voltage
Input
Frequency
Max. Input
Current
Inrush
Current (Cold
Start)
Withstand
Input
voltage
Insulation
resistance
Fuse Spec.
Hold-up time
Isolation Type
Operation
indication
Rated output
power
Rated output
current
Output
Output
voltage range
Conversion
efficiency
Protection Overvoltage
Caution
MPA024-24
100~240VAC
50/60Hz
1A max.
22A/115Vac (44A/230Vac)
3,000 VAC (Primary-secondary), 1,500 VAC
(Primary-PE), 500 VAC
(Secondary-PE)
>100MΩ/500VDC
2A
>15ms/ 115VAC，>60ms/ 220VAC
Transformer/ Photocoupler Isolation，
1500VAC/1 minute
LED (Green)
24W (Shared CPU dedicated power supply
and external Sensor power supply)
1A (Shared CPU dedicated power supply and
external Sensor power supply)
24VDC±1%
86%/110VAC，87%/220VAC
Latching overvoltage protection, re-power
2
MPA048-24
100~240VAC
50/60Hz
1A max.
22A/115Vac (44A/230Vac)
3,000 VAC (Primary-secondary), 1,500 VAC
(Primary-PE), 500 VAC
(Secondary-PE)
>100MΩ/500VDC
2A
>15ms/ 115VAC，>60ms/ 220VAC
Transformer/ Photocoupler Isolation，
1500VAC/1 minute
LED (Green)
48W (Shared CPU dedicated power supply
and external Sensor power supply)
2A (Shared CPU dedicated power supply and
external Sensor power supply)
24VDC±1%
86%/110VAC，87%/220VAC
Latching overvoltage protection, re-power
M-Series PLC Expansion Module User Manual