FATEK M Series User Manual page 34

3-2-5 Mount European Terminal Block
EU-standard terminal block installation method: align the EU-standard terminal block with the slot
➢
of the expansion module and then push it straight downward, as indicated in the figure below.
EU-standard terminal block removing method: push the fastener on both ends of the EU-standard
➢
terminal block downward and then lift both of them upward and you can take out the terminal, as
indicated in the figure below.
Mount European terminal Block
Dismount European terminal Block
8
M-Series PLC Expansion Module User Manual
Chapter 3 Installation and Wiring