FATEK M Series User Manual page 13

Precautions for the application environment
⚫
Please follow the instructions described in this Manual for carrying out the installation activities
correctly.
⚫
Do not operate the control system in any of the following locations:
(1) The location exposed to direct sunlight.
(2) The location with temperature or humidity exceeding the specified range.
(3) The location vulnerable to dewing effect due to abrupt temperature changes.
(4) The location exposed to corrosive or combustible gases.
(5) The location exposed to dust (especially iron chips) or smoke.
(6) The location exposed to water, oil or chemicals.
(7) The location vulnerable to impact or vibration.
⚫
When installing the system in any of the following locations, appropriate and effective
preventive measures should be taken:
(1) The location exposed to electrostatic or other type of noise.
(2) The location exposed to strong electromagnetic field.
(3) The location that may be exposed to radioactive pollution.
(4) The location near the power supply source.
Chapter 1 List of Expansion Modules
10
M-Series PLC Expansion Module User Manual