Engine Coolant - BRP SeaDoo GTI PRO 130 Operator's Manual

MAINTENANCE PROCEDURES

Engine Coolant

Recommended Engine Coolant
COUNTRY
Scandinavia
All other countries
Alternative, or if
not available
NOTICE
Always use ethylene-gly-
col antifreeze containing corrosion
inhibitors specifically for internal
combustion aluminum engines.
To prevent antifreeze deterioration, al-
ways use the same brand and grade.
Never mix different brands or grades
unless cooling system is completely
flushed and refilled.
Engine Coolant Level
WARNING
Check coolant level with engine
cold. Never add coolant in cooling
system when engine is hot.
______________
90
RECOMMENDED
COOLANT
EXTENDED LIFE
PRE-MIXED
COOLANT (EUR)
(P/N 779223)
EXTENDED LIFE
PRE-MIXED
COOLANT
(P/N 779150)
If the
recommended
coolant is not
available, use a low
silicate, extended
life ethylene-glycol
premixed coolant
(50%-50%)
specifically
formulated
for internal
combustion
aluminum engines.
CAUTION Many components
in the engine compartment may be
very hot. Direct contact may result
in skin burn.
Open seat.
Locate the expansion tank cap.
219001838-008_a
TYPICAL
1. Expansion tank cap
With watercraft on a level surface,
coolant level should be between MIN.
and MAX. marks on coolant reservoir
when engine is cold.
F18E0NY
TYPICAL - COOLANT EXPANSION TANK
1. Level between marks when engine is cold
NOTE: The watercraft is level when
it is in water. When on a trailer, raise
trailer tow pole and block in this posi-
tion when bumper rail is level.
1