Throttle Lever; Ibr Lever (Intelligent Brake And Reverse) (If Equipped) - BRP SeaDoo GTI PRO 130 Operator's Manual

CONTROLS
KEY TYPE
Normal
Learning
The information center displays the
type of key used, either Normal or Per-
formance.
smo2011-003-100_a
The SEA-DOO learning key, limits the
speed of the watercraft and the en-
gine torque, therefore enabling first
time users and less experienced op-
erators to learn how to operate the
watercraft while gaining the necessary
confidence and control.
The learning mode also offer the possi-
bility of setting the maximum speed of
the watercraft.
OPERATING MODES
Refer to
tails.

4) Throttle Lever

The throttle lever on the RH handle-
bar electronically controls the engine
speed.
To increase or maintain watercraft
speed, pull on the throttle lever with
your finger.
To decrease watercraft speed, release
the throttle lever.
______________
46
FLOAT COLOR
Yellow or Black
Green
for de-
smo2009-002-201_a
TYPICAL
1. Throttle lever
2. To accelerate
3. To decelerate
The throttle lever is spring loaded and
should return to rest position (idle)
when not pressed.
5) iBR Lever (intelligent
Brake and Reverse) (if
equipped)
The iBR lever on the LH handlebar can
electronically command:
– R - Reverse
– N - Neutral
– B - Braking.
NOTE: A minimum of 25% lever travel
is required to activate iBR functions.
smo2011-003-020_a
TYPICAL - iBR LEVER
1. iBR lever
2. Lever rest position
3. 25% stroke required to activate iBR function
4. Operating range
At speeds below 14 km/h (9 MPH),
pulling the iBR lever in will engage re-
verse.