How To Engage And Use Braking (Ibr Equipped Models Only) - BRP SeaDoo GTI PRO 130 Operator's Manual

OPERATING INSTRUCTIONS
NOTE: Engine power will be reduced
to idle whenever the iBR lever position
is changed.
Release the iBR lever to end reverse
operation.
To stop rearward motion after iBR lever
release, apply enough throttle to stop
rearward movement.
WARNING
The brake function has no effect
when travelling in reverse.
Available engine power is limited in
reverse mode, which limits reverse
speed.
WARNING
Only use reverse at slow speed
and for the shortest time possible.
Always ensure the path behind
is clear of objects, obstacles and
people.
When operating in reverse, turn the
handlebar in the opposite direction
that you want to move the rear of the
watercraft.
For example, to steer the rear of the
watercraft to port (left), turn the han-
dlebar to starboard (right).
______________
70
F18J08Z
TYPICAL - STEERING DIRECTION REVERSED
WHEN BACKING
CAUTION Steering
in reverse is opposite of forward.
To steer the stern to port (left) in re-
verse, turn the handlebar to star-
board (right). To steer the stern to
starboard (right), turn the handle-
bar to port (left). Reverse operation
should be practiced in open waters
in order to become fully familiar with
the controls and watercraft handling
characteristics before operating in
close quarters.
How to Engage and Use
Braking (iBR Equipped
Models Only)
WARNING
– The engine must be running to
be able to use the brake.
– The brake is only applicable
when operating in forward
movement, it has no effect on
rearward motion.
– The brake cannot prevent your
PWC from drifting due to cur-
rent or wind.
direction