Navigating The Multifunction Display - BRP SeaDoo GTI PRO 130 Operator's Manual

INFORMATION CENTER (GAUGE)
Navigating the
Multifunction Display
WARNING
Do not adjust display while riding,
you could lose control.
Selecting Functions
When operating at speed, the multi-
function display provides an indication
of the compass direction and azimuth
of the watercraft is traveling by default.
1. To select the various functions avail-
able through the multifunction dis-
play, press the MODE button re-
peatedly until the desired function
is visible:
– FUEL ECONOMY MODE
– FUEL CONSUMPTION
– VTS MODE
– DISPLAY
– FAULT CODES
– KEY MODE
– SETTINGS.
FUNCTION SUBMENU DISPLAYED IN
SEQUENCE WHEN MODE BUTTON
PRESSED REPEATEDLY
2. Then press the SET button to enter
that function.
NOTE: The available functions and the
order in which they appear depends on
the watercraft model. The fault code
function is only available when there
is an active fault. The settings func-
tion is only available when the engine
is shut off. The key mode function is
only available with a normal key.
______________
54
Function Description
Compass
A GPS incorporated in the information
center provides the indication in the
multifunction display.
The cardinal points, intermediate car-
dinal points, as well as the azimuth the
watercraft is travelling are displayed
in the multifunction display by default
when the watercraft is moving.
For a compass indication to be dis-
played, the GPS must have a good link
with the navigation satellites.
COMPASS DIRECTION DISPLAYED
NOTE: The compass indication is only
available above 5 km/h (3 MPH).
WARNING
Use the compass as a guide only.
Not to be used for precision navi-
gation purposes.
ECO Mode
ECO mode is a function by which en-
gine fuel consumption is reduced. Re-
OPERATING MODES
fer to
instructions.
Fuel Consumption
The FUEL CONSUMPTION function is
used to display the watercraft fuel con-
sumption two different ways:
– Instant fuel flow per hour (gal/h or
L/h)
– Average fuel flow per hour (gal/h or
L/h)
for detailed