General Operating Recommendations - BRP SeaDoo GTI PRO 130 Operator's Manual

VTS Trimming Methods
VTS trimming through multifunction gauge
X = Indicates a standard feature
N.A. = Not Available
Trimming the VTS Using the
Mode/Set Buttons
With the engine running in forward po-
sition, proceed as follows:
1. Press the MODE button to display
the VTS function in the multifunc-
tion display.
2. On the RH handlebar, press the
UP/DOWN button to change the
VTS setting.
1
smo2011-003-100_q
1. VTS message
2. VTS setting number
3. Confirm VTS operation by looking
for the VTS position indicator move-
ment in the digital display.
4. Press the SET button to save the de-
sired setting and return to the main
display.
NOTE: The available VTS settings are
between 1 and 5.
NOTE: The VTS system cannot be
fully tested without the engine operat-
ing in forward position. If the engine
is not running in forward position, only
the VTS indication will change when
the VTS control switches are pressed;
the nozzle will not change position.
AVAILABLE VTS TRIMMING METHODS
2
_______________
General Operating
Recommendations
Rough Water or Poor Visibility
Operation
Avoid operation in these conditions. If
you must do so, proceed with caution
using minimum speed.
Crossing Waves
The operator must grip the handlebar
firmly and keep both feet on the foot-
boards.
The passenger must grip the hand-
holds with both hands and keep both
feet on the footboards.
Reduce speed.
Always be prepared to steer and main-
tain your balance as necessary.
When going over waves, raise your
body slightly off the seat to absorb the
shocks with your legs.
When crossing wakes, always keep a
safe distance from watercraft ahead.
WARNING
When crossing wakes, slow down.
Operator and passenger(s) should
brace themselves and adopt a
semi-standing position to help
absorb the bumps. Do not jump
waves or wakes.
Stopping/Docking
When the throttle is released, the wa-
tercraft is slowed by water drag against
the hull. The stopping distance will
vary depending on the watercraft size,
OPERATING INSTRUCTIONS
GTI Pro 130
X
73