Table of Contents
Advertisement
MicroSD Card Installation
A microSD card can be used to store and view local recordings/snapshots. This camera requires a
class 10 or above microSD card formatted to FAT32 to function. The camera can handle a max of
256GB of microSD card storage.
Note: You will need to access the camera's motherboard to insert the microSD card.
1. Remove the lens cover for the camera with the supplied wrench tool to access the
motherboard.
2. Locate the provided microSD card slot on the motherboard and slide the clasp back to open.
3. Place the microSD card, into the provided microSD card slot gold pins down and close the
clasp.
4. Slide the clasp forward to secure the microSD card to the pins and secure the clasp.
Installation Guide
To install the camera on a ceiling or wall, please reference the below diagram as well as the steps:
Note: Prior to installation, please ensure that the installation environment can support at least 3x
the weight of the camera and bracket.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the IP8M-VD2893EW-AI and is the answer not in the manual?