Destination - Amcrest IP8M-VD2893EW-AI User Manual

Alarm: Alarm means that the camera only takes snapshots when an alarm is activated. Alarm
recording is represented by the color red.
Snapshot Recording Schedule: To specify a snapshot range, first select the type of snapshot
desired, then click and drag on time bar for the desired date. To edit multiple days at once, drag
the cursor further up or down to cover the other days.
Setup: Clicking this button opens a screen that allows for snapshot periods to be set for each day and
for each snapshot type. There are a total of 6 periods that can be set.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh
button. To save the settings, click the Save button.
Holiday Schedule
This tab is where holiday settings are configured.
Below is an explanation of the fields on the Holiday Schedule settings tab:
Record: This checkbox is referring to video recording.
Snapshot: This checkbox is referring to snapshot recording.
Calendar: This calendar allows the user to select days to designate as holidays. Once a day is
designated, it can be customized to stop recording or snapshots for that day by using the Record and
Snapshot checkboxes.
To refresh the page, click the Refresh button. To save the settings, click the Save button.

Destination

This menu controls where recorded media is stored. There are 4 tabs in this menu: Path, SD Card,
FTP, and NAS.
Path
This tab is where the user can designate a path for recorded video and snapshots to reside in.
Below is an explanation of the fields on the Path settings tab:
Event Type: This column designates storage options available to the camera. The options are SD Card,
FTP, and NAS.
Scheduled: Enable scheduled recordings to be recorded to the event type.
Motion Detect: Enable motion detect recordings to be recorded to the event type.
Alarm: Enable alarm record types to be recorded to the event type.
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh
button. To save the settings, click the Save button.
SD Card
This tab is where the user can change SD card settings.
43