System; Ap Mode; Reboot - Zcom SP250 Instructions Manual

4.2.3. System

4.2.3.1. AP Mode

This page is used to displayed and changed AP modes.
• Thin AP - Specifies to use and configure this AP with a wireless controller in the network. The wireless controller
will be responsible for the configuration of this AP. Only a few functions are available to be configured on this
AP in this mode.
• Fat AP - Specifies to use and configure this AP without a wireless controller in the network. More functions are
available to be configured on this AP in this mode.

4.2.3.2. Reboot

Click the Perform reboot link to reboot the device any unsaved configuration.
58-150006-IQN_V1.0
802.11ax Access Point User Manual
Page 11