1. Manuals
  2. Brands
  3. Zcom Manuals
  4. Wireless Access Point
  5. AS220V2
  6. Quick start manual

Zcom AS220V2 Quick Start Manual

2x2 dual band 802.11ac wave 2 indoor access point
Hide thumbs Also See for AS220V2:
Table of Contents

Advertisement

Quick Links

Download this manual
AS220V2
2x2 Dual Band 802.11ac Wave 2 Indoor Access Point
QSG

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AS220V2 and is the answer not in the manual?

Questions and answers

Related Manuals for Zcom AS220V2

Summary of Contents for Zcom AS220V2

  • Page 1 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point...

  • Page 2: Package Contents

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point Package Contents One indoor One mounting bracket Two mounting bracket screws access point + one screw + screw anchors allen wrench One quick start guide Note: If any of the items, mentioned above, are not included in the packaging or are damaged in any way, contact your reseller immediately.
  • Page 3 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point Wall mount  Determine where you want to mount the device, position the mounting bracket onto the wall, and use a marker to mark the two screw holes on the wall.

  • Page 4: Safety Notice

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point Installing the Anti-tamper Lock (Optional accessory_AS-LK18)  Slide all the cables through their respective holes on the anti-tamper lock.  Install the mounting bracket; plug all the  Position the anti-tamper lock onto the...

  • Page 5: Powering The Access Point

    Note: It is equipped with a secondary LAN/ PoE (Power Over Ethernet) out to power a device such as an IP phone, a security camera, or another AS220V2. The input power should be 802.3at (PoE+) standard, and the maximum output power of the PoE is 13 Watts.
  • Page 6 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point following optional settings. Optional: Set up the access point by your computer Note: The following procedure assumes that Windows 10 is the operating system. Procedures for other operating systems are similar.

  • Page 7: Technical Specifications

    Mobile APP Z-COM offers the App for bridge mode settings, which is available from our website: https://www.zcom.com.tw/index/downloads. Please research and download it to provision. If necessary: reset button If the access point needs to be reset, please press and hold the reset button for more than ten seconds to restore to factory default settings.

  • Page 8: Compliance Information

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point Physical LAN/PoE Out 48V/13 Watts (Max.), Passive PoE (Pairs 4, 5+; 7, 8 Return) Power Consumption Max. 12 Watts Environmental Temperature Humidity Operating -10°C to 60°C (14°F to 140°F) 10% to 90% (Non-condensing) Storage -20°C to 70°C (-4°F to 158°F)

  • Page 9: Declaration Of Conformity

    Declaration of Conformity Hereby, Z-COM, Inc. declares that the radio equipment type AS220V2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.zcom.com.tw/index/downloads...

Table of Contents