Zcom SP250 Instructions Manual page 16

Parameter
Buffered
The following parameters are available in the Network section:
Parameter
IPv4 WAN Status
IPv6 WAN Status
Active Connections
The following parameters are available in the DHCP Leases section:
Parameter
Hostname
IPv4 Address
MAC Address
Lease Time Remaining
The following parameters are available in the DHCPv6 Leases section:
Parameter
Hostname
IPv6 Address
DUID
Lease Time Remaining
58-150006-IQN_V1.0
802.11ax Access Point
Displays the buffered memory on the AP in kilobytes and percentage.
Displays the IPv4 WAN (Wide Area Network) connection status.
Displays the IPv6 WAN (Wide Area Network) connection status.
Displays the number of active network connections in integers and percentage.
Displays the hostnames of active DHCP clients connected to the AP. DHCP stands for
Dynamic Host Configuration Protocol.
Displays the IP addresses of active DHCP clients connected to the AP. IP stands for
Internet Protocol.
Displays the MAC addresses of active DHCP clients connected to the AP. MAC stands
for Medium Access Control.
Displays the DHCP lease time remaining for the DHCP clients connected to the AP.
Displays the hostnames of active DHCPv6 clients connected to the AP.
Displays the IPv6 addresses of active DHCPv6 clients connected to the AP.
Displays the DUID (DHCP Unique Identifier) of active DHCPv6 clients connected to the
AP.
Displays the DHCPv6 lease time remaining for the DHCPv6 clients connected to the
AP.
Description
Description
Description
Description
User Manual
Page 13