Zcom AS220V2 User Manual
  1. Manuals
  2. Brands
  3. Zcom Manuals
  4. Wireless Access Point
  5. AS220V2
  6. User manual

Zcom AS220V2 User Manual

2x2 dualband 802.11ac wave 2 indoor access point
Hide thumbs Also See for AS220V2:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AS220V2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Zcom AS220V2

Summary of Contents for Zcom AS220V2

  • Page 2: Table Of Contents

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual ABLE OF ONTENTS Chapter 1. Introduction ................................. 3 1.1. Product Description ....................................... 3 Chapter 2. Hardware Components ............................4 2.1. Package Contents ......................................4 2.2. Installation Requirements .................................... 4 2.3.

  • Page 3: Chapter 1. Introduction

    This manual is intended for installing and managing the AS220V2 using the HTTP interface. The AS220V2 will simply be referred to as the AP (Access Point) within this guide. The installer should be familiar with network structures, terms, and concepts.

  • Page 4: Chapter 2. Hardware Components

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Chapter 2. ARDWARE OMPONENTS 2.1. Package Contents One indoor One mounting bracket Two mounting bracket screws access point + one screw + screw anchors allen wrench 2.2. Installation Requirements TERMS OF USE: All Ethernet cabling runs must use CAT5e, 24 AWG (or above) Shielded Twisted Pair (STP) cabling.

  • Page 5: If Necessary: Reset Button

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Port Description The LAN port operates at 10/100/1000 Mbps at supports an RJ45 connector. LAN Port Supporting PoE Out, the LAN port can supply PoE power to PDs (Powered Devices) plugged into the LAN port.

  • Page 6: Chapter 3. Hardware Installation

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Chapter 3. ARDWARE NSTALLATION 3.1. Mounting the Access Point 3.1.1. In-wall mount  Determine where you want to mount the device, position the socket into the slot.  Insert the mounting bracket into the socket using ...

  • Page 7: Ceiling Mount (Optional Accessory_As-Clm4)

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 3.2. Ceiling Mount (Optional accessory_AS-CLM4)  Determine where you want to mount the device, position the mounting bracket onto the ceiling, and use a marker to mark the two screw holes on the ceiling.

  • Page 8: Safety Notice

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 3.4. Safety Notice 1. Do not install the device close to any electrical grounding device or lightning protection system. Place the device’s own grounding and lightning protection system apart from any electrical grounding device and lightning protection system as far as possible.

  • Page 9: Chapter 4. The Http Interface

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Chapter 4. HTTP I NTERFACE The AP can be configured through its supported software interface HTTP. The HTTP interface can be accessed using any standard web browsing software through any network. This chapter explains all the elements that are available on the HTTP interface of the AP.

  • Page 10: Status

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Note: Please make sure DHCP server is enabled on the network once accomplished WLC settings. The access point must receive its IP address through DHCP server. If the access point cannot connect to the WLC by DHCP broadcast, please refer to the following optional settings.

  • Page 11: General

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Displays the average system load calculated over a given period of time of 1, Load Average 5 and 15 minutes. The following parameters are available in this section:...

  • Page 12: System Log

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Wireless Switch Address 1/2/3/4 Enter wireless access controller IPv4 IP address. Wireless Switch IPv6 Address1/2/3/4 Enter wireless access controller IPv6 IP address. Wireless Switch Name1/2/3/4 Enter access controller DNS value.
  • Page 13 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.1. Status 4.3.1.1. Overview This page is used to provide an overview of the software settings and status of the AP. Please refer to page 10. The following parameters are available in the DHCP Leases:...
  • Page 14 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.1.2. Firewall 4.3.1.2.1. IPv4/IPv6 Firewall This page is used to display the detailed status of the IPv4 and IPv6 firewall features provided on the AP. 4.3.1.3. Routes This page is used to display the IPv4/IPv6 routing information. The following parameters are...
  • Page 15 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.1.6. Realtime Graphs 4.3.1.6.1. Load This page is used to display the load graph in real time. The following parameters are available in the Realtime Load section: Parameter Description Displays the 1/5/15-minute load in real time.
  • Page 16 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.1.6.4. Connections This page is used to display a graphical overview of active network connections in real time. The following parameters are available in UDP/TCP/Other section: Parameter Description...
  • Page 17 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.2.3. Scheduled Tasks 4.3.2.3.1. Task Specification Each line is a separate task written in the specification: 4.3.2.3.2. Crontab Examples A line in crontab file like below removes the tmp files from /home/someuser/tmp each day at 6:30 rm /home/someuser/tmp/* 4.3.2.4.
  • Page 18 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.3. Network 4.3.3.1. Interfaces After clicking the Add new interface button, the following page will appear: To configure the WAN/LAN interfaces, click the Edit button. Note: The following web page take WAN interfaces for example, LAN interfaces are similar.
  • Page 19 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.3.1.1. Static Address This page is used to display and configure the WAN interface settings. The following parameters are available in this section: Parameter Description Displays basic status information of the interface.
  • Page 20 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.3.1.1.1. General Setup The following parameters are available in this section: Parameter Description Status Please refer to page 19. Enter the IPv4 address or domain name of the DNS (Domain Name Use custom DNS servers System) server for the WAN connection here.
  • Page 21 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.3.1.1.2. Advanced Settings The following parameters are available in this section: Parameter Description Bring up on boot Select this option to bring up this interface when the device rebooted.
  • Page 22 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description option is selected. Normally, only one interface can be selected here. 4.3.3.1.1.4. Firewall Settings The following parameters are available in this section: Parameter Description Select the firewall zone that is assigned to this interface.
  • Page 23 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Dynamic DHCP When not selected, only statically assigned DHCP clients will be served. Select this option to force the DHCP server function on the AP to assign...
  • Page 24 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Status Please refer to page 19. Hostname to send when Enter the hostname that is sent when requesting DHCP here.
  • Page 25 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Select this option to bring up this interface when the device Bring up on boot rebooted. Use broadcast flag Select this option to use the broadcast flag on this interface.
  • Page 26 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Create / Assign firewall-zone Please refer to page 22. 4.3.3.1.3. Unmanaged The following parameters are available in this section:...
  • Page 27 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Status Please refer to page 19. Protocol For this section, we'll discuss the Unmanaged option. The following parameters are available in this section:...
  • Page 28 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Bridge interfaces Select this option to bridge this interface with another interface. Select this option to enable the STP function on this interface. Enable STP Note: This option is only available if Bridge interfaces are enabled.
  • Page 29 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Status Please refer to page 19. After clicking the Switch protocol button, the following will appear common configuration settings:...
  • Page 30 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.3.1.5. PPtP The following parameters are available in this section: Parameter Description Status Please refer to page 19. After clicking the Switch protocol button, the following will appear:...
  • Page 31 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Displays basic status information of the interface. • Port - Displays the interface name. For example, "eth0.2". Status •...
  • Page 32 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description echo failures are reached. Enter 0 to ignore failures. LCP echo request are sent at this specified interval. This function is LCP echo interval only effective in conjunction with the failure threshold function.
  • Page 33 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Status Please refer to page19. After clicking the Switch protocol button, the following will appear: The following parameters are available in this section: Parameter Description Displays basic status information of the interface.
  • Page 34 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Select this option to bring up this interface when the device Bring up on boot rebooted. Enable IPv6 negotiation on Select this option to enable IPv6 negotiation on the PPP link.
  • Page 35 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Select the physical interface that will be associated with this interface configuration here. Interface If desired, select and enter a Custom Interface name in the textbox provided.
  • Page 36 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.3.1.7. PPPoATM The following parameters are available in this section: Parameter Description Status Please refer to page 19. After clicking the Switch protocol button, the following will appear:...
  • Page 37 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Protocol support is not Click the Install package button to install the package needed for this installed protocol. Select the PPPoA encapsulation method here. Options to choose...
  • Page 38 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description The peer will be presumed to be dead after the given amount of LCP echo failure threshold LCP echo failures are reached. Enter 0 to ignore failures.
  • Page 39 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Status Please refer to page 19. After clicking the Switch protocol button, the following will appear: The following parameters are available in this section: Parameter Description Displays basic status information of the interface.
  • Page 40 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description rebooted. The following parameters are available in this section: Parameter Description Create / Assign firewall-zone Please refer to page 22. 4.3.3.1.9. L2TP The following parameters are available in this section:...
  • Page 41 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Displays basic status information of the interface. • Port - Displays the interface name. For example, "eth0.2". Status •...
  • Page 42 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Select this option to bring up this interface when the device Bring up on boot rebooted. Enable IPv6 negotiation on Select this option to enable IPv6 negotiation on the PPP link.
  • Page 43 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Create / Assign firewall-zone Please refer to page 22. 4.3.3.1.10. DSlite The following parameters are available in this section:...
  • Page 44 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Displays basic status information of the interface. • Port - Displays the interface name. For example, "eth0.2". Status •...
  • Page 45 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Use TTL on tunnel interface Enter the TTL (Time To Live) value for the tunnel interface here. The following parameters are available in this section: Parameter...
  • Page 46 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description interface. • BSSID - Displays the BSSID (Basic Service Set Identifier) hosted by the wireless interface. • Encryption - Displays the wireless encryption used on the wireless interface.
  • Page 47 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.3.2.1.1. Generic Atheros 802.11bgn (wifi0) Click Add button, after clicking the Edit button in the Generic Atheros 802.11bgn (ath0) entry, the following will appear: The following parameters are available in this section:...
  • Page 48 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Select the wireless transmit power for the interface here. Options to Transmit Power choose from are 0 dBm, 6 dBm, 10 dBm, 14 dBm, 18 dBm, 22 dBm, 26 dBm, and 30 dBm.
  • Page 49 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Select the wireless encryption for this interface here. Options to choose from are No Encryption, WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK Mixed Mode.
  • Page 50 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description After selecting the WPA-PSK/WPA2-PSK Mixed Mode option, the following Encryption settings are available. Select the cipher method here. Options to choose from are Force TKIP and Cipher CCMP (AES).
  • Page 51 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description available. Select the MAC address that is denied access to the wireless interface here. MAC List Select custom option to manually enter the MAC address here.
  • Page 52 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Displays a summary of the wireless configuration on this wireless interface. • Signal Strength - Displays the wireless signal strength.
  • Page 53 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Select the wireless mode on this interface here. Options to choose Mode from are auto, 802.11a, 802.11a+n, and 802.11ac.
  • Page 54 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Select the wireless encryption for this interface here. Options to choose from Encryption are No Encryption, WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK Mixed Mode. The following parameters are available in this section:...
  • Page 55 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Select to enable or disable MAC address filtering here. Options to choose MAC Address Filter from are disable, allow listed only, and allow all except listed.
  • Page 56 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description 802.11h Select this option to enable 802.11h amendment here. Select to enable the function that separates client-to-client Separate Clients communication here.
  • Page 57 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description IPv4 Address Displays the IPv4 address of the associated wireless station. Signal Displays the signal strength of the associated wireless station. Noise Displays the wireless signal noise of the associated wireless station.
  • Page 58 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Select this option to allow upstream responses in the 127.0.0.0/8 Allow localhost (loopback purposes) range. Enter the domain name that is whitelisted for RFC 1918 responses Domain whitelist here.
  • Page 59 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Filter private Select this option not to forward reverse lookups for local networks. Select this option not to forward requests that cannot be answered Filter useless by public name servers.
  • Page 60 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Hostname Displays the hostname of the active DHCP lease. IPv4/MAC Address Displays the IPv4/MAC address of the active DHCP lease.
  • Page 61 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description Select the interface for the static IPv4 route here. Options to choose Interface from are lan and wan. Enter the target IPv4 address or IPv4 network address for the static Target IPv4 route here.
  • Page 62 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description packets from hop to hop. To use the nslookup (name server lookup) utility, enter an IPv4 address or domain name in the textbox and click the Nslookup Nslookup button.
  • Page 63 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 4.3.3.6. Firewall This page is used to display and configure the firewall settings on the AP. The following parameters are available in this section: Parameter Description Enable SYN-flood Select this option to enable the SYN-flood protection function.
  • Page 64 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual The following parameters are available in this section: Parameter Description Zone  Forwarding Displays the visual flow for the firewall zone here. Click the Add/Edit/Delete button to add/ delete a new or modify the existing firewall zone.
  • Page 65 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description the space provided. The following parameters are available in this section: Parameter Description Select the IP address family that will be restricted here. Options to Restrict to address family choose from are IPv4 and IPv6, IPv4 only, and IPv6 only.
  • Page 66 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Parameter Description destination zones from the "newzone". Allow forward from source Select the source zone here. Traffic is forwarded from this zone to zones the "newzone". 4.3.3.7. Bluetooth This page is used to display and configure the Bluetooth settings on the AP.

  • Page 67: Chapter 5. Technical Specifications

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Chapter 5. ECHNICAL PECIFICATIONS Physical Dimensions 96 x 29.9 x 192 mm WAN/PoE In Port One 10/100/1000 Mbps port (L x W x H) (3.78 x 1.18 x 7.56 in) Weight 500 grams (1.1 lbs.)
  • Page 68 AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Wireless Extensible Authentication Protocol (EAP) types: EAP-Transport Layer Security (TLS) EAP-Tunneled TLS (TTLS) Protected EAP (PEAP) EAP-Subscriber Identity Module (SIM) *Above partial functions should be configured by Z-COM Wireless LAN...

  • Page 69: Chapter 6. Appendix

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual Chapter 6. PPENDIX 6.1. Warranty 6.1.1. General Warranty The warranty period stated below replaces the warranty period as stated in the user manuals for the relevant Products. If there is no proof indicating the purchase date, the manufacture date shall be considered as the beginning of the warranty period.

  • Page 70: Compliance

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 6.2. Compliance 6.2.1. RF Exposure Warning The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter.

  • Page 71: Optional Accessories

    AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual 6.4. Optional Accessories Item Picture AS-CLM4 Ceiling mount + two screws AS-LK18 Anti-tamper Lock AC-48052-XX 48 V 0.52A power adaptor SP-48063-XX 48V PoE Injector + power cord Note: When ordering power adaptors, you must specify the destination region by indicating -US, -EU instead of -XX.

Table of Contents