Processes - Zcom SP250 Instructions Manual

Parameter
MAC Address
Interface
The following parameters are available in the Active IPv4/IPv6 Routes section:
Parameter
Network
Target
IPv4 Gateway
Metric

4.3.1.4. Processes

This page is used to display currently running system processes and their status. The following parameters are
available in this section:
Parameter
Owner
Command
CPU usage
Memory usage
Hang Up
Terminate
Kill
58-150006-IQN_V1.0
802.11ax Access Point
Displays the MAC address of the ARP/neighbour entry.
Displays the physical interface that the ARP/neighbour entry resides on.
Displays the physical or logical interface the active IPv4/IPv6 route resides on.
Displays the target IPv4 network range of the active IPv4/IPv6 route.
Displays the IPv4 gateway address used by the active IPv4 route.
Displays the metric used by the active IPv4/IPv6 route.
Display the Owner's name with the process.
Display the Command with the process.
Display the CPU usage (%) with the process.
Display the Memory usage (%) with the process.
Hang up the process.
Terminate the process.
Kill the process.
Description
Description
Description
User Manual
Page 16