Led Indicator - Zcom SP250 Instructions Manual

Port
WAN / PoE Port
LAN Port
GND Port
Reset Button
RS485-A/B
(Not Available)
SIM Card Port
(Not Available)

2.4. LED Indicator

The following table describes the AP status referring to different LED behavior.
Color Behavior
on
Red
blink
on
White
blink
58-150006-IQN_V1.0
802.11ax Access Point
The WAN/PoE port operates at 10/100/1000/2500Mbps at supports an RJ45
connection.
Supporting PoE In, the AP can receive power through the WAN port from PSE (Power
Sourcing Equipment), rendering the need for a power supply into the power port
unnecessary.
The LAN port operates at 10/100/1000/2500Mbps at supports an RJ45 connector.
Ground through GND Port.
After use, the setting will be reset to default. Please press and hold about 15 seconds.
You can be transmitted through this port. (SP250-A04 Only)
SIM card can be inserted into this slot for use. (SP250-A04 Only)
Description
initialize
System is upgrading; do not touch or unplug power adaptor.
Connected to internet.
Unconnected to internet.
Description
User Manual
Page 3