Table of Contents
Advertisement
Most important configurator section is GPRS – where all your server and
configured and
Data Acquisition
details about FMC234 configuration using Configurator can be found here.
Quick SMS configuration
Default configuration has optimal parameters present to ensure best performance of track quality
and data usage.
Quickly set up your device by sending this SMS command to it:
"
setparam
2001:APN;2002:APN_username;2003:APN_password;2004:Domain;2005:Port;2006:0"
GPRS settings:
2001 – APN
2002 – APN username (if there are no APN username, empty field should be left)
2003 – APN password (if there are no APN password, empty field should be left)
Server settings:
2004 – Domain
2005 – Port
2006 – Data sending protocol (0 – TCP, 1 – UDP)
Note: Before SMS text, two space symbols should be inserted.
Default configuration settings
Movement and ignition detection:
Vehicle movement will be detected
by accelerometer
Device makes a record On Moving if one of these events happen:
300 seconds passes
Vehicle drives 100 meters
Device makes a record On Stop if:
1 hour passes while vehicle is
stationary and ignition is off
Records sending to server:
If device has made a record it is
sent to the server every 120
seconds
After successful SMS configuration, FMC234 device will synchronize time and update records to
– where data acquiring parameters can be configured. More
Ignition will be detected by
vehicle power voltage
between 13,2 – 30 V
Vehicle turns 10° degrees
Speed difference between
last coordinate and current
position is greater than 10
km/h
GPRS settings
can be
Advertisement
Table of Contents
