Setting The Outside Line; Setting The Area Code - Uniden 410 Owner's Manual

PROGRAMMING THE TELEPHONE
If you must dial an outside line to access a dial tone, you can program the phone to
automatically dial the outside digit when calling a stored caller ID record.
1 .
Press .
2.
3.
4.
5.
The area code is always included in caller ID records with telephone numbers. When your local
area code is programmed into the unit and you press
the area code is automatically removed.
If you must dial 10 or 11-digits when dialing from your area, leave the area code setting at 000.
The unit will prompt you to choose between 7, 10, 11 or 8-digit dialing each time you make a
caller ID call.
If you reside in a 7-digit dialing area, the unit can make returning phone calls easier by
automatically dialing stored Caller ID numbers. In order for this feature to work correctly, it is
necessary to program your local area code into the unit.
To program your local area code,
1 .
Follow steps 1-5 above under "SETTING
THE OUTSIDE LINE."
2.
3
. Using the keypad, enter in your three digit
area code.

SETTING THE OUTSIDE LINE

SETTING THE AREA CODE

14
6.
Press the soft key under "
the correct digit is displayed. (0 1 2 3 4 5
6 7 8 9 )
NOTE:
If an outside line is not needed, make sure there is a "-
" in the display.
7.
When the correct outside line digit appears
in the display, press "
8.
Press to exit.
to call a local caller ID record,
4 .
5.
Press to exit.
" until
" to save.