Programming Autodial; Autodial Information; Autodial Card; Programming A Caller Id Record Into Autodial - Uniden 410 Owner's Manual

Each unit in the system can store up to 20 autodial numbers. Ten 16-digit numbers can be
accessed with the autodial key and ten additional entries using the lower register key followed by
the autodial key. Each autodial entry can have up to 16 digits and can have 14 characters for the
name. Once a number has been stored in an autodial location, press the selected autodial
location key to have the unit automatically dial the programmed number.

AUTODIAL CARD

Remove the autodial card. Write down the names and/or telephone
numbers associated with the stored speed dial numbers and replace
the autodial card and plastic cover. An extra autodial card is
provided for your convenience.
Autodial numbers can be programmed in two ways:
PROGRAMMING A CALLER ID RECORD
To enter a caller ID record from your directory into an autodial location:
1 .
Press .
2.
Press the < or > soft keys to scroll through
records.
3.
When the caller ID record you want to
store into autodial appears in the display,
press and hold the selected autodial key
location.
4.
After you hear a beep:

PROGRAMMING AUTODIAL

INTO AUTODIAL
5 .
The telephone number of the caller ID
record will appear in the display. Press
" " to accept the number. (To edit the
number, see page 19 "EDITING AUTODIAL
ENTRIES.")
NOTE:
Include the outside line digit if one is needed to dial.
6.
The caller ID name will now appear in the
display. Press the soft key under "
to store the name and number. (To edit the
name, see page 19 "EDITING AUTODIAL
ENTRIES.")
7.
Press to exit.
NOTE:
Only the first 14 characters of a Caller ID NAME will
be transferred to the autodial location.
17
Home
Car
Bank
Joe Client
Direct Line
Agency
Sue Smith
LOWER
"