Setting The Ringer On/Off By Line; Always Ring - Uniden 410 Owner's Manual

PROGRAMMING THE TELEPHONE

SETTING THE RINGER ON/OFF BY LINE

Ringer settings for each outside line are individually controlled at each station. When the ringer
is turned "ON," the line will ring when calls are received. When the ringer is turned "OFF," that
line will not ring when a call is received. Whether the ringer is turned on or off, the LINE
INDICATORS will operate normally.
You can determine which lines ring at your station. All four lines are factory preset to ring on the
unit.
1 .
Press .
2.
3.
4.
5.
6.
ALWAYS RING is set to OFF by default. If you want to hear the phone ring when you are on
another line using the handset or the headset, change this setting to ON.
The telephone will NEVER ring while you are on another line using the SPEAKERPHONE,
regardless of the setting of ALWAYS RING to prevent the other party from hearing the phone
ring.
1 .
Follow steps 1-5 above under "SETTING
THE RINGER ON/OFF BY LINE."
2.
3.
The "
appear on the display.
7.
Press the soft key under "
toggle between turning the ringer "
"
8.
Press the soft key under "
advance to the next line selection.
9.
Repeat steps 7 and 8 until all lines have
been programmed.
10.
Press

ALWAYS RING

4.
5.
Press
15
" and line number will
" for the selected line.
to exit.
to exit.
" to
" or
" to