On initial power-up (the line cord(s) and AC adapter are connected) each station will prompt the
user to set the station ID, time and date. All other system defaults (see SYSTEM DEFAULTS on
page 4) are in place and the station is immediately ready for use. Refer to your completed system
configuration diagram, on page 8, for rapid installation.
ASSIGNING A STATION EXTENSION NUMBER
1.
2.
3.
Press the soft key under "
the chosen extension number (11-22)
appears in the display.
SETTING THE TIME AND DATE
1 .
AM
Use the keypad to enter the hour (two
digits) and minutes (two digits). Your
entries will appear in the display as they
are typed. If the time entry is incorrect,
press the soft key under "
re-enter the time.
2.
AM
3.
AM
4.
AM
INITIAL SETUP
QUICK SETUP
NOTE:
If another station's ID number is chosen, an error
beep will be heard and "
the display. Press the soft key under "
select another extension number.
4.
"
display.
5.
Press the soft key under "
" until
program the time.
Press the soft key under "
toggle between "
5.
6.
Use the keypad to enter the month (01-12)
" to
and day (01-31). To edit your entry, press
the soft key under "
date.
7.
8.
9.
"
appear in the display.
10
" will appear in
" will appear in the
" and "
".
AM
" to re-enter the
PM
" to
" to
" to
" will