Call Privacy Release; Conference Calling With Two Outside Lines - Uniden 410 Owner's Manual

CALL PRIVACY AND CONFERENCE CALLING

CALL PRIVACY RELEASE

At any time during a conversation you can release privacy on a call to allow one other station to
join the call.
During a conversation,
1.
Press . "
CONFERENCE
2.
The line INDICATOR of the privacy released call will flash red at other stations in the system,
indicating that any station in the system can pick up the privacy released line by pressing the
LINE button.
NOTE:
It is possible for more than one station to seize the same line simultaneously, say if two extensions try to select line 1
or answer a call on line 1 at the exact same moment. When this happens, privacy to other stations remains intact and
one or the other party should surrender the line.

CONFERENCE CALLING WITH TWO OUTSIDE LINES

Conference calling allows a station to call two phone lines to initiate a three-way conversation.
Once a call conference with two lines has been established, other stations in the system may not
join the conference call.
Once you make a call or answer a call,
1.
Press to place the caller on hold. The LINE INDICATOR will flash green.
HOLD
PAUSE
2.
Make or answer a call from another line.
3.
Press .
CONFERENCE
4.
The LCD will display "
5.
Press the LINE button of the call on hold.
6.
The conference call has been established and you may begin speaking to both parties.
7.
To end the conference call, hang up and both parties will be disconnected.
OR
If you want to continue speaking with one of the calling parties,
7.
Press the LINE button of the caller you want to maintain a conversation with and the other
caller will be disconnected.
TELEPHONE OPERATION
" will appear in your display.
."
33
(cont.)