Programming The Volume; Ringer Volume; Handset Volume; Speakerphone/Intercom Volume - Uniden 410 Owner's Manual

4-line system telephone with speakerphone and call waiting caller id

Hide thumbs

Table of Contents

The ringer volume can be set to HI, LOW or OFF. The ringer volume is factory pre-

set to HIGH. The ringer volume switch is located on the back of the unit. To adjust

the ringer volume, move the ringer volume switch to the desired position. When the

ringer volume is turned off, the unit will not ring when a call is received.

You can individually set the volume level for the handset/headset and speaker. When using or

switching applications, the set volume level is automatically adjusted.

While using the handset:

Press

to adjust the handset volume.

As the volume is adjusted, 1-4 bars will appear on the LCD to visually display the handset

volume level. (1 bar representing low and 4 bars representing high volume.) The volume

setting will remain at this level until it is changed or a power failure occurs.

SPEAKERPHONE / INTERCOM VOLUME

When using the speakerphone/intercom or when the phone is in standby mode,

Press

to set the speakerphone volume to the desired level.

As the volume is adjusted, 1-8 sets of bars will appear to visually display the volume level on

the LCD. The volume setting will remain at this level until it is changed or a power failure

occurs.

While using the headset:

1 .

Press

to adjust the headset volume.

2 .

As the volume is adjusted, 1-4 bars on the LCD will appear to visually display the headset

volume level. (1 bar representing low and 4 bars representing high volume.) The volume

setting will remain at this level until it is changed or a power failure occurs.