Redial; Auto Busy Redial - Uniden 410 Owner's Manual

MEMORY DIAL (cont.)
To dial a MEMORY DIAL number:
1.
Press . The stored number will be displayed.
2.
Press . The unit will go off-hook in speakerphone mode and dialing will commence.
OR
1.
Go off-hook using the handset, headset or speakerphone.
2.
Press . The number will be displayed and dialing will commence automatically.
The number stored in MEMORY DIAL will remain there until replaced with a new number.

REDIAL

The unit remembers the last number dialed and will automatically redial that number.
1.
Pickup the handset.
2.
Press . The last number dialed will appear in the display and the unit will
REDIAL
AUTO REDIAL
automatically redial the number.
3.
Return the handset to the cradle to end the call.

AUTO BUSY REDIAL

Auto busy redial automatically redials a busy line up to 10 times, at 10 second intervals. If the
line is still busy after 4 minutes, the unit will return to the idle mode. Automatic busy redial can
be canceled anytime by pressing
Once you get a busy signal:
1.
Hang up.
2.
REDIAL
Press twice. The unit will attempt to redial the number for 15 seconds and the
AUTO REDIAL
SPEAKERPHONE INDICATOR will flash rapidly.
3.
The SPEAKERPHONE INDICATOR will then flash slowly for 10 seconds before attempting to
redial the number.
4.
The unit will redial the busy line up to 10 times or until the call is answered.
5.
Press to end the auto redial and begin speaking.
6.
Return the handset to the cradle or press
TELEPHONE OPERATION
MEMORY STORAGE
again.
REDIAL
AUTO REDIAL
(cont.)
to end the call.
27