PROGRAMMING CALL WAITING CALLER ID
SELECTING WHICH CALLER ID RECORDS ARE SAVED
If you subscribe to any caller ID service, caller ID data will be displayed on the unit's LCD when
the call is received. The save feature allows you to decide which displayed records will be saved
in unit memory. The save feature is factory pre-set to "SAVE: ALL" (all calls will be recorded in
the caller ID directory). The unit can save the most recent 140 caller ID records.
1 .
Press
.
2.
3.
4.
TURNING CALL WAITING CALLER ID ON
If you subcribe to call waiting caller ID, the caller ID data from an incoming call can be displayed
even when you are on another call. The call waiting caller ID feature is factory pre-set to "OFF." If
you subscribe to a call waiting caller ID service, you can turn the unit's caller ID feature on.
1 .
Press
.
2.
3.
4.
5 .
Press the soft key under "
toggle between "
"
6.
When your selection appears in the
display, press
5.
Press the soft key under "
the selection.
6.
Press
22
," "
."
to exit.
" to save
to exit.
" to
" and